Doors: Specifications

Door Image Gallery | Door Options | Door Specifications | Stickings Door Species | Door Finishes | Door Textures | Glass Options | Casing and Trim

General door specifications

• Top rail height - 5-3/16" - 5-5/8"
  
• Bottom rail height - 8-15/16"
  
• Stile widths - 5-5/16" - 5-3/4"
  
• Stile and rail dimensions include profile, sticking and stop
  
• Stile and rail material solid, laminated, or engineered with lumber core and heavy veneer - mill option
  
• Muntins - 1-3/8" - 2"
  
• Doors have 1/2" x 4-1/4" hardwood spiral dowels: 2 in top and lock rail, 1 in intermediate rail and 4 in bottom rail
  
• All panels and mulls float to allow for expansion and contraction
  
• All panels are solid wood
  
• One-, two-, and three-panel doors over 1'6" wide have edge-glued panels
  
• Glazing is always with tempered or safety glass
  
• All glass meets ANSI safety specifications
  
• 3/8" bronze spacer in insulated glass units
  
• Flat arch - radius is equal to door width, i.e., 36" door= 36" radius
  
• True arches join perpendicular to the stile
  
• True-arch-top rails are typically 2 pieces
  
• True arch - radius equals half of door width
  
• Top half of Dutch door always closes to 1/2 lap of bottom door
  
• Dutch door shelf is 5-1/2" unless specified otherwise when ordered
  
• Bottom Dutch door height is always 42" to allow for handset at 36"
  
• 3'x8'x1-3/4" 20-minute label fire door available in Exterior Rocky Mountain and Classic sticking details
  
• Plank count is based on door width, as follows:
  2'4" to 2'6" = 4 planks
  2'8" to 3' = 5 planks
  3'6" = 6 planks
  4' = 8 planks
  
• Lumber is kiln-dried to a moisture content between 7%-9%

Panel thickness

Sticking	Exterior	Interior
Classic	1-3/8"	3/4"
Arts & Crafts	5/8"	5/8"
Mission	1-3/8"	3/4"
Rocky Mountain Jr.	1-3/8"	3/4"
Rocky Mountain Sr.	1-3/4"	1-3/8"
Sonoran Flush	1-3/8"	-
French	1-3/8"	-
Spanish	1-3/8"	-
Crafted	1-3/8"	-
Fina	1-3/8"	-
All plank panels	1-1/4"	3/4"

Exterior door specifications

• Standard door thickness - 1-3/4", optional 2-1/4"
  
• Panel thickness varies based on sticking detail
  Classic, Arts & Crafts, Mission, Rocky Mountain Jr., Rocky Mountain Sr., Sonoran Flush, French, Spanish, Fina, Crafted. (See chart above)

Interior door specifications

• On regular latilla doors, light and air will pass through.
  
• For louver doors, louvers are approximately 3" wide and extend beyond the plane of the door.
  
• Standard door thickness - 1-3/8", optional 1-3/4"
  
• Panel thickness varies based on sticking detail
  Classic, Arts & Crafts, Mission, Rocky Mountain Jr., Rocky Mountain Sr., Sonoran Flush, French, Spanish, Fina, Crafted